[FC] ring and pinion gears

[corvanatics@corvair.org]

If you have a 140 with 110 haeds you have a 110!!  The only dif is the
heads.  The rest of the motor is the same including the cam.
Bruce


----- Original Message -----
From: "Charles M. Wrobel" <r75@shaw.ca>
To: <corvanatics@corvair.org>
Sent: Thursday, August 07, 2003 7:56 PM
Subject: Re: [FC] ring and pinion gears


> Well, I have just switched from 389 to 327 but it's not
> back from the shop yet so I can't comment.... but I
> will. I have a '63 Corvan with a 140 with the 110 heads.
> This could be interesting as I do need to climb some
> hills but the vehicle is almost never loaded. A big load
> for me would be less than 500 pounds. I'll post my
> results after a trial.
>
> - Charles
> _______________________________________________
> Corvanatics mailing list
> Corvanatics@corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics