[FC] What the hec is a

Merv and/or Loretta corvanatics@corvair.org
Sat Aug 16 03:36:01 2003


Ah... the manual calls it the relay rod assembly.... BTW, I am starting to
consolidate GB/CV parts, especially the hard to find ones.... made a good
start with four rear axle/bearing assemblies, just need to check what kind
of shape they are in.... thanx!
Merv

----- Original Message -----
From: "mopar" <mopar@jbcs2.net>
To: <corvanatics@corvair.org>
Sent: Friday, August 15, 2003 11:47 AM
Subject: Re: [FC] What the hec is a


> If you look underneath at the steering, there is only one thing that it
> could be. It is on the drivers side opposite of the idler arm, and
connects
> the relay from the steering box to the center link. It's kind of a "one of
a
> kind" item, and if you need one, they are hard to find. Be sure to save
it,
> and while you are underneath grab the brake light switch too. If there are
> any solid body panels, cut them off, they are hard to come by as
> well..............also the door sills........ramp...latches for
> ramp...hinge...
>
> Gary Swiatowy
>
> >On Fri, 15 Aug 2003 10:42:46 -0700 "Merv and/or Loretta"
> <krupross@sunwave.net> wrote.
> >Is it the idler assembly? or the relay arm assembly? or the relay rod?
> >thanx!
> >Merv Krull
> >Salmon Arm
> >
> >
> >----- Original Message -----
> >From: "John" <jdozsa@carr.org>
> >To: <corvanatics@corvair.org>
> >Sent: Friday, August 15, 2003 6:16 AM
> >Subject: Re: [FC] rampside parts for sale...DACC Homecoming
> >
> >
> >> Be sure you save the boomerang and idler arms.  From the guy that
> >re-builds them.
> >>
> >> John in Maryland
> >>
> >> "Brian P. Seibenick" wrote:
> >> >
> >> > I am in the process on parting out a 61 Rampside to finish my
Rampside.
> >> > I don't need all the parts and will be at the DACC Homecoming next
week
> >> > in Detroit.  Please let me know if there is anything in particular
that
> >> > you need and I can make sure I take it off the Rampside before I
leave
> >> > and but your name on it.  The Rampside is (was) a 3 speed version.
> >> >
> >> > Thanks for the space,
> >> > Brian Seibenick
> >> > _______________________________________________
> >> > Corvanatics mailing list
> >> > Corvanatics@corvair.org
> >> > http://www.vv.corvair.org/mailman/listinfo/corvanatics
> >> _______________________________________________
> >> Corvanatics mailing list
> >> Corvanatics@corvair.org
> >> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> >_______________________________________________
> >Corvanatics mailing list
> >Corvanatics@corvair.org
> >http://www.vv.corvair.org/mailman/listinfo/corvanatics
> _______________________________________________
> Corvanatics mailing list
> Corvanatics@corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics