[FC] e-mail/camping question

Tue Jul 8 10:29:01 2003

  Did you send these pictures out Ben?  I have been wanting to do
something like that to my GB and this might be enough to get me started!
Maybe an article for the Corvanatics from you would be handy who don't
get email?

  Del Patten

-----Original Message-----
From: Ben Stiles [mailto:bensbus@paonline.com]
Sent: Friday, July 04, 2003 6:28 PM
To: corvanatics@corvair.org
Subject: Re: [FC] e-mail/camping question

I, too, made a receiver for my Greenbrier and Rampside.  I took a
standard 1
1/4 receiver hitch from two junked mini vans and then measured the
dimensions BETWEEN the rear lower bumper bolts (the ones inside the
"frame
rails.")  Then, I got two pieces of heavy metal plate and drilled them
to
match the locations of the bumper bolts, installed them with the bumper
bolts, jacked the cut-to-fit receiver hitch up, and had it welded in
place.
It is a good idea to place washers behind the side plates to give some
clearance so the hitch can be removed and replaced without it being too
tight to fit comfortably.

And what have I hauled with it?  Several utility trailers with varying
loads
and bike racks, of course.

Hope this helps.  If ya'll would like to see some pics of mine, I will
snap
some and see if Lynn will scan them for me.  I am sure there are many
variations, all of which will work.  Yours looks good and sturdy,
Thomas.

Cheers!  Ben Stiles

> http://users.sisna.com/gwyth10/rampside.html
>
> Click on the pictures to see them larger.
>
> I have a cad drawing of it with dimensions, I could send you a pdf
file
> early next week.
>
> Thomas Gwyther ('65 500, '64 Sebring Spyder replica, '61 Rampside will
be
a
> custom)
> http://users.sisna.com/gwyth10/  (personal website, updated 11/06/02)
> http://community.webshots.com/user/sebringspyder (photo page)
> ----- Original Message -----
> From: "thomas shepard" <teshep@marshallnet.com>
> To: <corvanatics@corvair.org>
> Sent: Friday, July 04, 2003 1:54 PM
> Subject: Re: [FC] e-mail/camping question
>
>
> > Hey Tom,
> > I would like to see the pictures of your receiver hitch!! Let me
know
what
> > kind of material and how much is needed.
> >
> > Thomas Shepard
> > ' 61 Loadside
> > ' 65 Monza
> > ICE Pres
> >
> > [demime 0.98e removed an attachment of type image/gif]
> >
> > [demime 0.98e removed an attachment of type Image/gif]
> > _______________________________________________
> > Corvanatics mailing list
> > Corvanatics@corvair.org
> > http://www.vv.corvair.org/mailman/listinfo/corvanatics
> _______________________________________________
> Corvanatics mailing list
> Corvanatics@corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
_______________________________________________
Corvanatics mailing list
Corvanatics@corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics

[demime 0.98e removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s]