[FC] EM SEAT BELT LOCATION

[Paul Steinberg]

You will have to find a copy of either 1962, 63, or 64 accessory installation
manual for the proper location for drilling the holes in the floor pan for the
rear seat belts.  After you drill the holes, then you use a large (about 2
1/2") steel washer under the floor pan as a reinforcement for the seat belt
anchor.  This is one of those times that a picture is worth a thousand words.
Paul
  ----- Original Message -----
  From: WILSON
  To: corvanatics@corvair.org
  Sent: Thursday, July 17, 2003 11:07 PM
  Subject: [FC] EM SEAT BELT LOCATION


  Hey Everybody;

  I have a couple of  EM Convertible questions:

  Where do I mount rear seat belts?  I found the mounting locations for the
  fronts, but couldn't find the mounting locations for the rear seat belts.
The
  shop manual doesn't have any information on the mounting location.

  Also, has anybody used the Pertronix "Flamethrower II" coil with the
regular
  Pertronix Flamethrower electronic ignition?  I bought the electronic
ignition
  and the coil from Clark's, but the coil instructions say not to use the
  Flamethrower II coil with their regular electronic ignition.

  Thanks,

  Scott Wilson
  '63 Rampside
  '63 Monza Convertible
  _______________________________________________
  Corvanatics mailing list
  Corvanatics@corvair.org
  http://www.vv.corvair.org/mailman/listinfo/corvanatics