[FC] FC Rear Crossmember

[Diane and Bob Galli]

   Mike,  you might try cross reference the GM P/n with Clark's, also try
Kanter Auto Products. They buy warehouses of OEM parts. I have gotten things
there that our vendors do not have. Their phone is 800-526-1096. They are in
New Jersey
      Bob
----- Original Message ----- 
From: <Mikeamauro@aol.com>
To: <corvanatics@corvair.org>; <virtualvairs@corvair.org>
Sent: Tuesday, June 10, 2003 8:52 PM
Subject: [FC] FC Rear Crossmember


> " Mike, I think the rubber pieces you describe are shown in the '61 Shop
> Manual on page 3-35, fig. 3-65. They are also shown in the '60 Shop Manual
> on page 3-18 fig. 3-32. The '60's also mounted like the FC's with a plate
> bolted to the body. GM P/N 6257616 4 required per vehicle. This is listed
in
> my '67 GM parts manual. '61-'64 cars did not have this requirement. These
> parts are shown clearly in these two manuals, if this is the correct
piece.
> Please let me know.
>      Thanks,
>     Bob"
>
>
> Yes Bob, bingo, there they are in the 61 manual, page3-35, figure 3-65
"Rear
> Crossmember".  the top one spaces between the "Cross Sill Asm.
(Undebody)",
> the other spaces between the crossmember, and the stamped steel
support-unnamed
> (bolted to the floor pan (underbody)).
> Now to find a supplier for there rubber bushings.
>
> Thanks for helping to define the parts needed.
> Mike 64 Deluxe Greenbrier (and other assorted vairs)
> _______________________________________________
> Corvanatics mailing list
> Corvanatics@corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics