[FC] Chasing an Oil Leek

[Michael Emanuele]

I am aware of the bellhousing differences and also have this info with part
numbers and years on disc. I guess my concern now is that this info states
that it doesn't seem to matter what bellhousing is used for a power glide as
long as it is a PG housing.
Thanks for all the input,
Mike Emanuele
61 Rampside 140
69 Monza Convertible
----- Original Message -----
From: <vairpair@att.net>
To: <corvanatics@corvair.org>
Sent: Tuesday, May 06, 2003 7:43 PM
Subject: Re: [FC] Chasing an Oil Leek


> Mike.  This is just a thought, after reading your entry.  Some time back,
Lon
> Wall indicated that there is a difference in bell housings,  between early
and
> late.  It seems that there is a difference of about 2 or 3 thousandths
between
> the two.  If I remember correctly, you must use a early bell housing with
a
> early differential and a late with a late.  If all that is true, a few
> thousandths would give you a leak and the seal still look good.  Just food
for
> thought.   Bob Bauer
> _______________________________________________
> Corvanatics mailing list
> Corvanatics@corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics