[FC] Rear bumper removal

[Hennerfeind, Joe R.]

Thanks,

I had removed the bolts in the inner side side of the "frame."  I will check for the outer ones.

Joe

-----Original Message-----
From: corvanatics-admin@corvair.org
[mailto:corvanatics-admin@corvair.org]On Behalf Of Dave Sanger
Sent: Thursday, April 29, 2004 9:20 AM
To: corvanatics@corvair.org
Subject: Re: [FC] Rear bumper removal


Joe,

I'm not an expert, but have successfully remove the rear bumper from my 63
Rampside in 15 minutes. Yes, remove the obvious bolts. Remove grille, if you
have one. Then, you will see bolts on the "frame" pointing towards the outer
side of the vehicle. Remove these bolts; the bolts go through the bumper
brackets. Presto, the bumper brackets (and bumper) slide out.

Hope this works.

Dave Sanger
63 Rampside (in paint shop)
64 Spyder Convertible
----- Original Message ----- 
From: "Hennerfeind, Joe R." <JHennerfeind@odod.state.oh.us>
To: <corvanatics@corvair.org>
Sent: Thursday, April 29, 2004 8:25 AM
Subject: [FC] Rear bumper removal


> Hello group,
>
> I have a 61 greenbrier that I am giving to a friend this weekend for
parts, and I am trying to remove the rear bumper ASAP.  I have removed all
the obvious of bolts(from the brackets), but I am missing some as it is
still not loose.  Seems to have a wealth of bolts around the holes for the
tow hooks.  Which of these must I remove?
>
> Thanks,
> Joe Hennerfeind
>
> Environmental Specialist
> ODOD/OHCP
> _______________________________________________
> Corvanatics mailing list
> Corvanatics@corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America,
http://www.corvair.org/
_______________________________________________
Corvanatics mailing list
Corvanatics@corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America, http://www.corvair.org/