[FC] clutch head fix?

[Clark Hartzel]

I'm pretty sure the screws are 5/16-18, not 1/4-20.
Clark Hartzel

-----Original Message-----
From: corvanatics-admin@corvair.org
[mailto:corvanatics-admin@corvair.org]On Behalf Of James Davis
Sent: Wednesday, May 26, 2004 3:26 PM
To: corvanatics@corvair.org
Subject: Re: [FC] clutch head fix?


Personally, I use button head hex cap screws as a replacement for all the
FC cap screws. After you clean and chase the nut threads (welded to the
body panel), use a liberal amount of anti seize to help when you remove
them the next time.
Jim Davis

  At 01:57 PM 5/26/2004, you wrote:
>Hey Keith, I have used 1/4-20 hex head bolts about 1/2 in" long.
>Thomas Shepard
>' 61 Loadside
>' 65 Monza
>
>[demime 0.98e removed an attachment of type image/gif]
>
>[demime 0.98e removed an attachment of type Image/jpeg]
>_______________________________________________
>Corvanatics mailing list
>Corvanatics@corvair.org
>http://www.vv.corvair.org/mailman/listinfo/corvanatics
>This list sponsored by the Corvair Society of America,
>http://www.corvair.org/
_______________________________________________
Corvanatics mailing list
Corvanatics@corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.690 / Virus Database: 451 - Release Date: 22-May-04

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.690 / Virus Database: 451 - Release Date: 22-May-04