[FC] Seat Belt installation

[Charles Bartlett]

Hi J R;
   Thanks for the location pic's they came out great, I have been reluctant on drilling it but if I don't it will never get done. I was talking to a guy that use to work on the Corvairs and several times he has had to drill holes for seat belts and he told me of a simple solutiontake a small 2X4 block useing the size bit drill into the block all the way threw clean the hole from chips or splinter's readjust the bit in the chuck to where only 1/2" of the bit is exposed and your good to go, he guaranteed me that you'll not hit anything. It sound logical to me. AQgain thanks fo the pic's.
Charles (Charlie) Bartlett

J R Read_HML <hmlinc at sbcglobal.net> wrote:
I can't help other than to warn to not drill into the gas tank! Or other 
vitals for that matter.


Attachments (if any) are scanned with anti-virus software.

Later, JR

----- Original Message ----- 
From: "Charles Bartlett" 
To: "The Corvanatics list" 
Sent: Friday, April 15, 2005 11:09 PM
Subject: Re: [FC] Seat Belt installation


> Hi Dale;
> I have a 64 Greenbreir and am getting ready to install seat belts but 
> someone had cut out the deck behind the front seat and rewelded another 
> deck from a Panel Van that did not have the holes drilled I know the 
> location for the holes but I do not have a picture to visually verify the 
> location. I would very mush appreciate a picture to verify, could you 
> please call me so I could make some arrangement to get a few pictures from 
> you. Please call me at 4197824504. I thank you in advance.
> Charles (Charlie) Bartlett
>
> sty.net> wrote:
> Hello James,
>
> Do you intend to install just lap belts or 3-point belts? I can take some
> pictures of the front 3-point belt installation in our Greenbrier. From
> these you may be able to find the equivalent mounting locations in your
> Rampside. Please contact me off-list.
>
> Dale Dewald
> Hancock, (UP) MI
>
>
> At 02:13 PM 4/15/05 -0500, you wrote:
>>Sorry forgot to put a subject
>>
>>
>> I would like to put seat belts in my 61 Rampy, any suggestions as where
>> to locate the mounting bolts?
>>
>> Jim Dallas
>> _______________________________________________
>> Corvanatics mailing list
>> Corvanatics at corvair.org
>>
>>http://www.vv.corvair.org/mailman/listinfo/corvanatics
>> This list sponsored by the Corvair Society of America,
>> http://www.corvair.org/
>>_______________________________________________
>>Corvanatics mailing list
>>Corvanatics at corvair.org
>>http://www.vv.corvair.org/mailman/listinfo/corvanatics
>>This list sponsored by the Corvair Society of America, 
>>http://www.corvair.org/
>
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
>
>
> ---------------------------------
> Do you Yahoo!?
> Read only the mail you want - Yahoo! Mail SpamGuard.
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/ 

_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America, http://www.corvair.org/

		
---------------------------------
Do you Yahoo!?
 Plan great trips with Yahoo! Travel: Now over 17,000 guides!