[FC] Ramp rubber attachment

[Ben's Bus]

I remember reading in a CorvanAntics issue years ago that silicone sealant
glue works well, but the real trick is making sure the new rubber is cleaned
well. I believe it said to clean it with denatured alcohol or the like in
order that the adhesive has a good surface on which to bond.

Ben

----- Original Message -----
From: <SHGraphics at aol.com>
To: <corvanatics at corvair.org>
Sent: Tuesday, October 18, 2005 10:46 AM
Subject: Re: [FC] Ramp rubber attachment


> Bill,
>     I bought my ramp rubber at Clark's Corvair Parts, and they recommended
a
> small can of adhesive that they sell. I used it a couple of years ago, and
> it's still holding great.
> Take care,
> Bill Beckley
> '61 Rampside
>
> P.S. - I DID rough up the area with sandpaper. No big deal since you'll
never
> see that area again.
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America,
http://www.corvair.org/
>
>