[FC] compression check

[BobHelt at aol.com]

In a message dated 9/27/05 8:46:07 PM US Mountain Standard Time, 
lumppytom at hotmail.com writes:

> The points were good and I timed it by hand turning it over while watching 
> a plug attached to the number 1 wire and the spark looked hot.
> Thanks,
> Tom
> 

Tom,
Well you should be OK then. Give it that shot of gas I mentioned and get it 
started.
I wouldn't worry about the compression readings now. Just start it and see 
how it runs.
Regards,
Bob Helt