[FC] Rampside Information

[James Davis]

Well that depends.....  The FC lubrication diagram is shown on page 
2-16 of the 1961 "Corvair Shop Manual".  Extra fittings may have been 
added at the bellcrank and idler arm.  The original universals could 
have been replaced with greasable "U" joints.  The ball joints may 
have been replaces with sealed lifetime ball joints with no grease 
fittings. So as you see it depends.  I count 16 plus/minus the modifications.
Jim Davis



At 10:24 AM 8/1/2008, woofcorvair at aol.com wrote:
>Hello Owners & Members:
>    It would be greatly appreciated, if someone would  verify the 
> exact number
>of grease fittings,
>and other lubrication spots for the Rampside  Pickup.  I need to have some
>type of picture or drawing that shows  these grease fittings, and lubrication
>areas.
>    There has been some disagreement on the exact number  of grease fittings
>located on a Rampside.
>
>Thank you, Darrell in SW Missouri
>