[FC] Ignition related question

[Paul Steinberg]

The tumblers are worn out, if you can remove the key in all positions.  I 
suggest that you have a locksmith replace the tumblers and make you a new 
key using the original key number that is stamped on the key cylinder.  If 
you don't have a local locksmith, I have an old timer friend that does this. 
He is located in Iowa, works fast and is inexpensive.  I highly recommend 
him for all locksmithing services.  An old time locksmith that knows how to 
fix the old car locks.
 Paul in CT
----- Original Message ----- 
From: "Scott & Cyndi Wilson" <scwilson8126 at wowway.com>
To: <corvanatics at corvair.org>
Sent: Wednesday, November 04, 2009 11:42 AM
Subject: [FC] Ignition related question


>I have a question related to ignition lock/cylinder removal.
>
> My ignition switch can be turned to all positions without putting the key 
> in
> the ignition.
>
> Do I need to buy a new ignition switch/lock cylinder or can my local
> locksmith fix this?
>
> Thanks,
>
> Scott Wilson
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.424 / Virus Database: 270.14.49/2480 - Release Date: 11/04/09 
07:37:00