[FC] click or clunk from differential?

[Kevin Lloyd]

Do you have contact info for the IL diff specialist? I am having the same issues, more like a tick though and newer u-joints. Would be nice to have the info if needed. 
 
I have yet to look, mine may even be outboard say brakes or a bearing. I remember the previous owner talking about a tick in the rear and thats why he did u-joints and axle/bearings. It wasnt there initialy, but appeared and hasnt gotten worse yet. 
 
Thanks, Kevin

--- On Mon, 3/29/10, J R Read_HML <hmlinc at sbcglobal.net> wrote:


From: J R Read_HML <hmlinc at sbcglobal.net>
Subject: Re: [FC] click or clunk from differential?
To: Wild8bill at aol.com, corvanatics at corvair.org
Date: Monday, March 29, 2010, 10:03 PM


I should have also said that you just might be due for a diff rebuild.  I 
know a guy who does that, but he's in Illinois.
Later, JR

----- Original Message ----- 
From: <Wild8bill at aol.com>
To: <corvanatics at corvair.org>
Sent: Monday, March 29, 2010 9:47 PM
Subject: [FC] click or clunk from differential?


>I have a click or clunk sound that is correlated to the wheel rotating on
> the rear driver side. It is obvious when driving, but not too loud. This 
> is
> a  new thing that appeared in the last few weeks. I thought it might be 
> the
> wheel  bearing, but when I inspected it, the sound comes from the
> differential side of  the drive shaft, and only happens when turning the 
> axle
> forwards, not backwards.  Any advice?
>
> Bill
> Richmond, CA
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/ 

_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America, http://www.corvair.org/