[FC] Problem after installing High Volume Blower Motor

[Joel McGregor]

The diode across the relay coil won't help that symptom.  I'm guessing it will have to be wired differently to fix it.  You may be able to use a large diode in series but they can be expensive if they have to carry much current.  Someone send me a diagram so I can try to figure it out.
My '65 wouldn't shut off when I left the diode out of the alternator trigger wire.
Thanks,
Joel McGregor

________________________________
From: LonzoVair at aol.com [LonzoVair at aol.com]
Sent: Tuesday, November 01, 2011 5:23 PM
To: Joel McGregor
Subject: Re: [FC] Problem after installing High Volume Blower Motor

Oh, and Joel, as for my 63 Greenbrier (the one I mentioned earlier today) the fan stays blowing, and the engine keeps running until I turn the fan switch to OFF... although I don't think I ever tried to turn it to low or medium... Oh, and the GEN light comes on when I turn the IGN off but it keeps running.
Hope this helps (or confuses you) a little.
Later,
Lonzo