[FC] FC Front Spring Install

[Greg Shaw]

  I know this was just brought up a while ago but I can't find the info in my saved mail. I am installing new front coil springs in my 61 Rampside. The ends of the coil will only line up with either the top or bottom coil stop. If the top is in place the bottom is off by about 90 degrees (end of coil at 3 o'clock, stop at 6 o'clock as looking down on lower control arm from drivers side). I'm thinking it would be preferable to have the coil engaged in the lower control arm. Your experience and opinions would be helpful. I will probably call Clark's tomorrow and ask them as well. Thank you.

Greg Shaw
Dearborn, MI