[FC] 61 FC suspension rebuild

[doug bell]

Finally going to get around rebuilding my front suspension on the 61 
Rampside.
I have accumulated over the years upper and lower ball joints, upper and 
lower A arm bushings, outer tie rod ends, and a rebuilt boomerang arm.
i understand that the 61 FC suspension is the same as for the 58-62 full 
size Chev.(Impala, Biscayne)?
Should I be looking for the _inner tie rod ends_ and the _sleeves_ too?
And is the actual A arm the same as on the car?
Any advice/suggestions would be appreciated.
Thanks
Doug
60 4 door 700
61 Rampside
66 Ultra VAn #215