[FC] Trans Mount to Rear C/M Torque

[hallgrenn]

Greg,
Page 6A-18 lists torque of 25 to 35 for front mounts to suspension cross frame and 20 to 30 ft lbs for the bolts attaching front mounting bracket to transmission.
Bob Hall


Sent on the new Sprint Network from my Samsung Galaxy S®4.

<div>-------- Original message --------</div><div>From: Greg Shaw via Corvanatics <corvanatics at corvair.org> </div><div>Date:07/04/2014  8:40 AM  (GMT-05:00) </div><div>To: corvanatics at corvair.org </div><div>Subject: [FC] Trans Mount to Rear C/M Torque </div><div>
</div>Happy 4th of July! I'm replacing my trans mounts on my 61 Rampside while repairing a broken bolt (trans mounting support bracket to trans). I cannot find a torque for the nuts & bolts for attaching the trans mount to the rear cross-member (C/M). Am I blind or is it not in the manual (which I have). They show a nice image of the mounts and hardware in the rear suspension section and mention the (C/M) mount bolt torques, but not the trans mount to C/M. Thanks in advance.

Greg
Dearborn, MI
_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America, http://www.corvair.org/