[FC] FC turn signal to late model car

[Ken Hand]

 I think it would be very easy to use a 65-66 turn signal switch housing. It would take a little work with a Dremel cutting wheel for the retainer but that is about it. The signal stalk could be straightened so it clears the FC steering wheel.

 

Ken Hand
Handy Car Care
248-613-8586
www.corvairmechanic.com

For those that have fought for it, Freedom has a flavor the protected will never know.
http://s186.photobucket.com/albums/x118/vairmech/Viet%20Nam%20Pictures%201971/


 

 

-----Original Message-----
From: Jon Peters via Corvanatics <corvanatics at corvair.org>
To: corvanatics <corvanatics at corvair.org>
Sent: Tue, May 23, 2017 4:07 pm
Subject: [FC] FC turn signal to late model car

few years back, or is it many, I found an article on how the change the 63 and older FC turn-signal from the cable / slide switch to the 64 FC design, by using a late model switch, steering tube, arm, and cover. I did this to my 63 Greenbrier and worked / works great. But now I want to change my 62 Rampside over and can not find the article again. Any one have a copy, or know where to find it, I think it might have been in one of the CORSA Communica 
Thank you Jon Peters 
_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America, http://www.corvair.org/