[FC] Ignition Switch Question

[Ken Hand]

More than likely you will have to pull the bezel and then pad a screwdriver and pry behind the bezel, this will pop the chrome cover off the switch and you can then remove it. Make the trip out to me and I can make you a lock that matches your key and I also have ignition switches here. 


Ken Hand
Handy Car Care
248-613-8586
www.corvairmechanic.com

For those that have fought for it, Freedom has a flavor the protected will never know.




-----Original Message-----
From: ROBERT WILSON via Corvanatics <corvanatics at corvair.org>
To: corvanatics <corvanatics at corvair.org>
Sent: Wed, Jan 24, 2018 6:26 pm
Subject: [FC] Ignition Switch Question

Hey Guys;   My early-model ignition switch is stuck in the "ON" position.  It won't turn to "OFF", "LOCK" or "START".   I had to disconnect the coil wire to get the engine to turn off.   The keys fit in, but it will no longer turn.  I can't even turn it to push the pin in to remove the bezel.   Has anyone else experienced this and how did you fix it.  I'm assuming I will probably have to get a new ignition switch.   Thanks,   Scott     _______________________________________________Corvanatics mailing listCorvanatics at corvair.orghttp://www.vv.corvair.org/mailman/listinfo/corvanaticsThis list sponsored by the Corvair Society of America, http://www.corvair.org/