[FC] Wheel Spacers

[Ken Hand]

I have to ask why you don't want to us loose spacers? I use them on the race car with no issues.
If you really want custom I can make you anything you want but you will be paying the price of the big spacers you saw.

Ken Hand
Handy Car Care
248-613-8586
www.corvairmechanic.com

For those that have fought for it, Freedom has a flavor the protected will never know.



Date: Fri, 14 Feb 2020 08:02:15 +0000 (UTC)
From: Eric Kirven <ultravan345 at yahoo.com>
To: Corvanatics <corvanatics at corvair.org>
Subject: [FC] Wheel spacers
Message-ID: <1958997541.2937778.1581667335404 at mail.yahoo.com>
Content-Type: text/plain; charset=UTF-8

Hello All,
I have a set of AL wheels I want to use on my Rampside.I need a wee bit more setback. 1/2" more would do the trick.
My question is has anyone used wheel spacers?I would prefer the kind that you bolt to the wheel and then bolt the wheel ?to the spacer.The thinnest one of those I have found are over an inch thick.?
That leaves me with a spacer and replacing the studs with longer ones.
Yes? No? Maybe???
Best Regards,
Eric

------------------------------

Subject: Digest Footer

_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America, http://www.corvair.org/


------------------------------

End of Corvanatics Digest, Vol 170, Issue 1
*******************************************
_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America, http://www.corvair.org/