[NoVa-Corvairs] Follow-Up from Today's Meeting

Curtis L Shimp novacc-list@corvair.org
Sun, 21 Nov 2004 15:08:07 -0500


Mike:

It was a pleasure working on your car as you had everything so well
prepared.  Also I enjoy meeting your father.

When I got home I did sit down with Clark's catalog and yes you have the
right part numbers although you were going to get a set (32) viton "O"
rings, part no. C4314, for your push rod tubes.

Regarding the fan belt you just need a good wrapped belt like Clark's
Ultimate.  For the engine you have and the type of driving you will
likely be doing you don't need to get too fancy.

Regarding the Bell housing Crank Seal I don't think that it makes that
much difference.  Per the comments that Bryan made, the polyacrylate seal
will probably give you the tightest seal but the Viton will provide
better resistance to hardening due to high temperatures.  I have used
both and I could not tell you with which one I was the most satisfied.

On Sat, 20 Nov 2004 22:41:53 EST AnnePugs@aol.com writes:
> I want to again thank everyone who helped out with my car today.  
> Needless to 
> say, I'm pretty darn pleased with the turn of events.
> 
> I've spent some time on Clark's website looking for the parts that 
> were 
> recommended to me.  I was hoping somebody could confirm that I'm 
> about to order the 
> right stuff since Clark's uses some slightly different names for 
> some items.
> 
> Here's a chart with the part name I wrote down, what Clark's calls 
> it (if I'm 
> right), their part number, and their price. 
> 
> What I wrote            What Clark Calls it                Clark's 
> Part #     
>                Clark's Price
> Pilot Bushing            Clutch Pilot Bushing                C701    
>          
>                 $9.10
> 
> Axle Stub Seals        Drive Shaft Seals                     C496    
>          
>                 $4.65/ea.
> (in transaxle, 2 reqd)
> 
> Input Shaft Seal        Throwout Bearing Shaft Seal     C494         
>          
>            $3.95
> (nose of transaxle)
> 
> Fan Belt                   Fan Belt                                
> C5790 
> (Clark's Ultimate)  $10.90
>                                                                      
>        
> C8704 (Otto Super Belt)  $12.80
> 
> Oil Pan Gasket        Cork Oil Pan Gasket                C199        
>          
>             $5.95
>                               "Best Quality"
> 
> Crankshaft Seal        Bellhousing Crank Seal            C493 
> (polyacrylate)  
>        $9.95
>                                                                      
>   or   
> C493V (Viton)                 $13.90 
> 
> *Clark's say I also need a new Bellhousing gasket if I'm replacing 
> the Crank Seal - Part # C4628 - $3.15
> 
> So, my questions are am I buying the right parts and which of the 2 
> kinds of 
> fan belts
> and crank seals should I get.  Also, can anyone think of anything 
> I've 
> forgotten?
> (For those who weren't able to make it today, the engine is out and 
> its 
> separated from 
> the transaxle).
> 
> Thanks a lot for the input.  
> 
> -Mike


________________________________________________________________
Juno Platinum $9.95. Juno SpeedBand $14.95.
Sign up for Juno Today at http://www.juno.com!
Look for special offers at Best Buy stores.