[NoVa-Corvairs] 28-30 April Vair Fair

[Curtis L Shimp]

Daniel:

I have been gone for  a week.  Did you get your half shaft installed?? 
Sometimes, when you are putting the bearing cap over the shaft on the
U-joint, a needle bearing or two come lose from the cap and get caught
between the bottom of the cap and the shaft. It is hard to tell but the
U-joint will not fit into the yoke.

I can met you at your office but what time can you leave on Friday 28 for
the Vair Fair?

Curt

On Tue, 04 Apr 2006 06:40:38 -1100 "Daniel Goldberg"
<goldie at danielgoldberg.net> writes:
> I'm hip to that.  You could drive to my office here in Leesburg, 
> which isn't too far from Ron's Sterling abode.  Either you (Ron) can 
> meet us here, or we can meet you at your house.
> 
> Also ... I installed my rebuilt half-shafts on Saturday, and 
> couldn't get one of the axle-side clamps to fit flush on the yoke.  
> That is, maybe three or four bolt threads are showing.  Being that 
> years ago I snapped off a bolt in an axle yoke hole, I'm a bit gun 
> shy about cranking down any more on this bolt.  Besides, everything 
> appears to be fine.   Am I worrying needlessly?
> 
> 
> > ----- Original Message -----
> > From: "clshimp at juno.com" <clshimp at juno.com>
> > To: novacc-list at corvair.org
> > Subject: Re: [NoVa-Corvairs] 28-30 April Vair Fair
> > Date: Tue, 4 Apr 2006 17:23:39 GMT
> > 
> > 
> > Ron:
> > I am going and will be at the banquet.
> > Regarding caravaning, I am willing if the group leaves late 
> morning on Friday. 
> >   I don't want to drive down in rush hour.
> > Curt
> > 
> > _______________________________________________
> > Novacc-list mailing list
> > Novacc-list at corvair.org
> > http://www.vv.corvair.org/mailman/listinfo/novacc-list
> 
> >
> 
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>