[NoVa-Corvairs] Saturday Meeting

[Darrin Hartzler]

Thanks Ron,

Actually, I used both.   Started with solid core and C25 gas but ran out 
of wire before I was done with the passenger side and went with the larger 
flux core that I had on hand.   Does not seem to be too much difference 
except that the solid with gas approach is much cleaner.   Hardest part 
was getting that old metal clean enough to keep a good arc going. 

Darrin

-----------------------------------------
Darrin R. Hartzler
Senior Corporate Governance Officer
International Finance Corporation
Washington, DC
Phone: +1-202-473-0027
Fax: +1-202-522-1604
Office: F4K-144
e-mail: dhartzler at ifc.org



rvtum at aol.com 
Sent by: novacc-list-bounces at corvair.org
08/22/2006 10:06 PM
Please respond to
Northern Va Corvair Club <novacc-list at corvair.org>


To
novacc-list at corvair.org
cc

Subject
Re: [NoVa-Corvairs] Saturday Meeting






Darrin, the floors look great!  Are you using flux core or shield gas for 
your welds?
 
Ron 
 
 
-----Original Message-----
From: dhartzler at ifc.org
To: novacc-list at corvair.org
Sent: Mon, 21 Aug 2006 9:47 AM
Subject: Re: [NoVa-Corvairs] Saturday Meeting


Gents,

Since I am the host of the next meeting, I am putting a call out to help 
me by hauling away some car parts from my place next month.   I have a 
full suspension (front and rear) for an early model....and Bryan is 
interested in the front.  I think it is from a 63', but will take a look 
if anybody is interested in the rear.   I have alot (alot) of various 
other parts from numerous cars being parted out.   These are the parts I 
got from the guy who sold me the red car and I would like to get rid of as 

much as possible.   All cheap and will help load!   Bring a truck.

Last message was meant to upset Daniel...sent to all you by mistake. 
Daniel, we did get Ron's 64' running like a top...another early revival!

I finished welding the floors in Yellowcar this weekend and have pics up 
at ---> http://corvaircenter.com/phorum/read.php?1,39065

Earlier post with big thick weld beads visible here --> 
http://corvaircenter.com/phorum/read.php?1,37635   This thread also has 
some very nice panel replacement (think big) pics from a couple other 
guys.   Puts my efforts to shame.

For the meeting we will finish the prep work on a replacement front 
suspension that I have from a parts car and install it and if we have time 

we will pull and cut the coils on the rear suspension and adjust the 
Konis....that hardest setting is a bit....well....hard. 

Darrin

-----------------------------------------
Darrin R. Hartzler
Senior Corporate Governance Officer
International Finance Corporation
Washington, DC
Phone: +1-202-473-0027
Fax: +1-202-522-1604
Office: F4K-144
e-mail: dhartzler at ifc.org



Darrin Hartzler <dhartzler at ifc.org> 
Sent by: novacc-list-bounces at corvair.org
08/21/2006 09:27 AM
Please respond to
Northern Va Corvair Club <novacc-list at corvair.org>


To
Northern Va Corvair Club <novacc-list at corvair.org>
cc

Subject
Re: [NoVa-Corvairs] Saturday Meeting






Hey,

The guys said you were going to see your girlfriend in Richmond...was too 
hot to do much decent work anyhow.

D

-----------------------------------------
Darrin R. Hartzler
Senior Corporate Governance Officer
International Finance Corporation
Washington, DC
Phone: +1-202-473-0027
Fax: +1-202-522-1604
Office: F4K-144
e-mail: dhartzler at ifc.org



"Daniel Goldberg" <goldie at danielgoldberg.net> 
Sent by: novacc-list-bounces at corvair.org
08/18/2006 08:45 PM
Please respond to
Northern Va Corvair Club <novacc-list at corvair.org>


To
"Northern Va Corvair Club" <novacc-list at corvair.org>
cc

Subject
Re: [NoVa-Corvairs] Saturday Meeting






I'll be there in spirit, guys -- i'm vairing to richmond on Saturday

> ----- Original Message -----
> From: rvtum at aol.com
> To: novacc-list at corvair.org
> Subject: [NoVa-Corvairs] Saturday Meeting
> Date: Fri, 18 Aug 2006 19:32:47 -0400
> 
> 
>   Members,
> 
> The project for tomorrow's meeting will be to get my 64 running!  I 
suspect a 
> carb rebuild will be needed for at least one.  I would also like to take 


some 
> time to give you all an update on the Vair Fair planning.  See you all 
> tomorrow.
> 
> Ron
> 
> 905 N. Amelia St
> Sterling VA, 20164
> (703) 430-6582
> ________________________________________________________________________
> Check out AOL.com today. Breaking news, video search, pictures, email 
and IM. 
> All on demand. Always Free.
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list

>

_______________________________________________
Novacc-list mailing list
Novacc-list at corvair.org
http://www.vv.corvair.org/mailman/listinfo/novacc-list


_______________________________________________
Novacc-list mailing list
Novacc-list at corvair.org
http://www.vv.corvair.org/mailman/listinfo/novacc-list


_______________________________________________
Novacc-list mailing list
Novacc-list at corvair.org
http://www.vv.corvair.org/mailman/listinfo/novacc-list
________________________________________________________________________
Check out AOL.com today. Breaking news, video search, pictures, email and 
IM. All on demand. Always Free.
_______________________________________________
Novacc-list mailing list
Novacc-list at corvair.org
http://www.vv.corvair.org/mailman/listinfo/novacc-list