[NoVa-Corvairs] Fwd: <VV> vacuum modulator
Bryan Blackwell
bryan at skiblack.com
Mon Oct 23 16:02:18 EDT 2006
Ron, see below, came as an answer on VV and sounded similar to your
problem with the sedan.
--Bryan
Begin forwarded message:
> You say there are no leaks under the car. Put a piece of clean
> cardboard under the transmission. You might weight it with a brick.
> Start the engine and place the PG in drive (holding it firmly with the
> brakes). Rev the engine slightly (1,000 to 1,200 rpm) for no more
> than 30 seconds (don't want to overheat the transmission). Shut the
> car down and look at the cardboard. If you have a small red puddle
> under the drivers side of the transmission, you have a bad governor
> "O"-ring. The leak will only show up when the PG is in gear.
> Jim Davis
More information about the Novacc-list
mailing list