[NoVa-Corvairs] Take Two: Curt, did you get a new email address?
63redbrier at cox.net
63redbrier at cox.net
Wed Jul 11 07:47:29 EDT 2007
All: Let me see if I can remember everything. First, Yes, AJ, I do have many pullers (in addition to one I borrowed from Ron!), so if Curt's doesn't do the trick, maybe one of mine will! Curt, if Darrin's exhaust packings are not to your likeing (sp?), I may also have a set. Finally, I'm sorry Curtis; however, I either mispoke (or you may have misheard) ((or we both may be getting half-heimers!)); however, I have never actually welded anything, although I do have a desire to learn!!! Your best bet for welding would be Ron or Darrin. Was that everything? We'll see you all this Saturday! I have one big project and many small projects, so there should be few idle hands. Here's the plan:
>
> Major project: Install at least the front, if not both the front and rear, anti-roll bars on the Greenbrier. My concern here is that I want to keep the weight of the van on the suspension. I had a set of drive up ramps, hated them, sold them at a yard sale; however, this might be a solution. Any other ideas?
>
> #1 Minor project: The spare tire and screw-in interior panel in the Greenbrier needs to be removed (the rear seat may also need to come out) to remove the sound deadening sheet which is falling in front of the outside cooling ducts on the side in the belt line. My concern here is overheating the engine due to lack of air flow.
>
> #2 Minor project: I need to remove the rear axles from the blue Rampside that I am scrapping. The suspension is already out. I will have the yokes well "soaked" before Saturday. If anyone wants the suspension piece you can have it, I only want the axles. If not it will go to the scrap yard.
>
> #3 Minor project: Clarabel, the '60 sedan, has not been driven since the last convention due to a "no-fuel" problem, and I have just not had the time to look into it. I'm guessing the pump; however, it could be a plugged in-line fuel filter, plugged stone filters, collapsed line, etc.?
>
> #4 Minor project: The brown Rampside runs well enough to drive down I95 to get a load of mulch at the Lorton landfill (2 weekends ago); however, ever since the club helped with installing the pointless ignition, it seems to want to shake itself apart! I'm guessing timing? The screws that hold down the gas pedal also need to be replaced. We can use the ones from the Yellow GB.
>
> If we could accomplish any one of these, I will be grateful! Two would be tremendous! (These next two are for you, Bryan!) Three a home-run, and four, a grand-slam!
>
>
> ---- Darrin Hartzler <dhartzler at ifc.org> wrote:
> > Curt,
> >
> > I did find a set of 140 exhaust to crossover packings in my
> > pile-o-parts...they are graphite kind from Clarks (C243A).
> >
> > Will bring them on Saturday.
> >
> > Darrin
> > -----------------------------------------
> > Darrin R. Hartzler
> > Senior Corporate Governance Officer
> > International Finance Corporation
> > Washington, DC
> > Phone: +1-202-473-0027
> > Fax: +1-202-522-1604
> > Office: F4K-144
> > e-mail: dhartzler at ifc.org
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > To ajjr13 at earthlink.net, novacc-list at corvair.org
> > cc novacc-list at corvair.org
> > bcc Darrin Hartzler/FO/IFC
> > Subject Re: [NoVa-Corvairs] Saturday's Meeting
> > Curtis Shimp <clshimp at juno.com>
> > Sent by: novacc-list-bounces at corvair.org
> > 07/10/2007 07:45 PM
> > <HR><font size=-1>Please respond to
> > Northern Va Corvair Club <novacc-list at corvair.org></font><HR>
> > <font size=-1></font>
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > A. J.:
> >
> > I have a puller and I have already put it in the Corvair.
> >
> > Curt
> >
> > On Tue, 10 Jul 2007 11:52:02 -0400 (GMT-04:00) "A. J. Paluska, Jr"
> > <ajjr13 at earthlink.net> writes:
> > > Can someone bring a steering wheel puller to Saturday's meeting at
> > > Greg's. I would like to install my 15" steering wheel in lieu of the
> > > 13" one that is on my car. Thanks.
> > >
> > >
> > >
> > > A. J.
> > > _______________________________________________
> > > Novacc-list mailing list
> > > Novacc-list at corvair.org
> > > http://www.vv.corvair.org/mailman/listinfo/novacc-list
> > >
> >
> > _______________________________________________
> > Novacc-list mailing list
> > Novacc-list at corvair.org
> > http://www.vv.corvair.org/mailman/listinfo/novacc-list
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > Novacc-list mailing list
> > Novacc-list at corvair.org
> > http://www.vv.corvair.org/mailman/listinfo/novacc-list
>
-------------- next part --------------
Skipped content of type message/delivery-status-------------- next part --------------
An embedded message was scrubbed...
From: <63redbrier at cox.net>
Subject: This Saturday's Meeting - the 14th!
Date: Tue, 10 Jul 2007 21:37:46 -0400
Size: 5591
Url: http://www.vv.corvair.org/pipermail/novacc-list/attachments/20070711/de980915/MailSystemError-ReturnedMail2.eml
More information about the Novacc-list
mailing list