[NoVa-Corvairs] Fw: Joining your club

[rvtum at verizon.net]

Members,

At the Vair Fair, I managed to sell most of the salvagable parts from the 65 vert that I parted out.  All that is left is the (RA)95 block, camshaft, crankshaft, front vibration canisters and the vert boot trim molding with snaps.  If anyone is interested, I'll bring them to the next meeting. Free to anyone that wants them!  I also sold (8) of our 2007 fair t-shirts at cost, $7.00 ea.  I'll bring the money to the next meeting.  We have 7 mediums and 1 large left.  

Ron

 

>From: Darrin Hartzler <dhartzler at ifc.org>
>Date: 2008/05/05 Mon PM 01:09:00 CDT
>To: Northern Va Corvair Club <novacc-list at corvair.org>
>Cc: novacc-list-bounces at corvair.org, ajjr13 at earthlink.net, 
	novacc-list at corvair.org
>Subject: Re: [NoVa-Corvairs] Fw: Joining your club

>Curtis,
>
>It is worse, it is the blower bearing that rode up and his magnesium fan 
>contacted with the turkey roaster and ground some of the fins down....will 
>be a good tech session at A.J.s though.
>
>Please tell us a bit about your life out there in the arid highlands.
>
>Darrin
>
>
>____________________________________________________________________________________________
>Darrin R. Hartzler
>Senior Corporate Governance Officer
>International Finance Corporation
>Washington, DC
>Phone: +1-202-473-0027
>Fax: +1-202-522-1604
>Office: F4K-210
>e-mail: dhartzler at ifc.org
>
>IFC is a member of the World Bank Group
>
>
>
>
>Curtis Shimp <clshimp at juno.com> 
>Sent by: novacc-list-bounces at corvair.org
>05/05/2008 12:56 PM
>Please respond to
>Northern Va Corvair Club <novacc-list at corvair.org>
>
>
>To
>ajjr13 at earthlink.net, novacc-list at corvair.org
>cc
>novacc-list at corvair.org
>Subject
>Re: [NoVa-Corvairs] Fw: Joining your club
>
>
>
>
>
>
>A. J.:
>
>Thanks for the response and the change in POC.  Right after I sent the
>original message to you all about this subject I got a note from Aaron
>that said he had found another way to contact the club.
>
>Regarding the Vair Fair did they not have a econo run? (no answer
>required).  I just wondered if Greg can duplicate his 66 mph or whatever
>he got in his Greenbrier at the Detroit convention.
>
>Regarding your bad bearing on your Corvair, sometimes it is just the
>pressed on clip that holds the squirrel cage fan to the motor shaft.  The
>clip gets loose and the cage fan starts to rattle.  Most people replace
>the metal fan with a plastic one that runs quieter.
>
>Curt
>
>On Mon, 5 May 2008 07:26:41 -0400 (GMT-04:00) "A. J. Paluska, Jr"
><ajjr13 at earthlink.net> writes:
>> Curt: 
>> 
>> On the last Chapter report, you were listed, with your email, as the 
>> club POC. The other officers were also mentioned as well as myself 
>> as the Secretary. I'll change it to make me the POC. Both Bryan and 
>> I have contacted Aaron and sent him a copy of the HAM. Hopefully, he 
>> will come to the May meeting at Darrin's. 
>> 
>> Just got back from the Vair Fair. There were five NVCCers there, but 
>> only Greg's Greenbrier made the show. I rode along with him on the 
>> rally. It was interesting with really nice scenery. I went down to 
>> get a blower bearing housing with bearing as mine started to work 
>> loose on the way to the last meeting. 
>> 
>> How is New Mexico? 
>> 
>> A. J.
>> _______________________________________________
>> Novacc-list mailing list
>> Novacc-list at corvair.org
>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>> 
>> 
> 
>_______________________________________________
>Novacc-list mailing list
>Novacc-list at corvair.org
>http://www.vv.corvair.org/mailman/listinfo/novacc-list
>
>
>_______________________________________________
>Novacc-list mailing list
>Novacc-list at corvair.org
>http://www.vv.corvair.org/mailman/listinfo/novacc-list