[NoVa-Corvairs] Spare EM 4Spd Trans Support

[63redbrier at cox.net]

Bryan:  I saw this on CraigsList and thought you may be interested for your RoadRunner!  It's under the Free Listings...  Greg

Free Old Motor ( 1970 426 CID Hemi ) (Haymarket)

--------------------------------------------------------------------------------
Reply to: sale-997860331 at craigslist.org [?]
Date: 2009-01-18, 3:13PM EST



The motor is froze up and does not turn over...Free to a good home   
  

---- Bryan Blackwell <bryan at skiblack.com> wrote: 
> Hi Ron,
> 
> It depends on how much toe you end up with.  I'd say 3/8" total won't  
> be too bad.  Beyond that you'll likely get a lot of tire wear and  
> possibly funky handling.  The part you want doesn't wear, so I'd  
> think it wouldn't be too hard to come by.
> 
> --Bryan
> 
> On Jan 18, 2009, at 9:55 PM, rvtum at verizon.net wrote:
> 
> > All,
> >
> > In a discussion I had at Al's yesterday about my toe in problem, it  
> > was suggested that I check the JY primer to make sure I have the  
> > correct transmission support.  According to the primer, the 4sp  
> > support is "dished" forward to accomodate the longer trans.  Mine  
> > apppears to be flat, even though it's still not making contact with  
> > the front of the trans.  Does anyone have a spare EM 4Spd support  
> > for sale or trade? I've attached a photo and would appreciate any  
> > thoughts on whether this amount of toe in would cause damage if  
> > driven.  The picture is of the passenger side. The drivers side is  
> > off a little, but not as noticable. I'd appreciate any insight here.
> >
> > Ron
> 
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list