[NoVa-Corvairs] 1960 Corvair 700 Coupe For Sale

Justin jp0181 at yahoo.com
Thu Jun 6 11:06:22 EDT 2013 

You pick the day in the week for the first week of July and ill be ready with everything. Would have like to tackle it last week in June but can complain.

J. Smalley


On Jun 6, 2013, at 10:43 AM, Darrin Hartzler <dhartzler at ifc.org> wrote:

> Justin,
> 
> Sorry, but my wife it out til next Friday and last weeks of school...so 
> fully booked and then off to Portland and Alaska...back on July 1st...here 
> for a week and then Paris.   Maybe a weekend day in early July would be 
> good for me. 
> 
> Replacing a head is not so daunting...just lots of parts to remove on the 
> top of the engine as well as the carb studs if doing it in the car.  Start 
> spraying penetrant on the top stud nuts on that side now...the ones that 
> you can see just above the valve cover on that head.     That will help. 
> You will need exhaust donuts for that side as well as the crossover 
> (likely), head gaskets (just use stock steel ones), carb base gaskets. May 
> want to replace the o-rings on the pushrod tubes on that side if you have 
> not done this yet.  What am I forgetting gents?
> 
> 1960 80 HP heads should be very inexpensive unless rebuilt.   When I did a 
> 61 80 HP motor a few years ago I found two NOS heads, one for $30 and the 
> other for $50...had to add valves and springs though.   Good used head 
> from Greg is a good bet.
> 
> Darrin
> 
> ____________________________________________________________________________________________
> Darrin Hartzler 
> Global Manager, Corporate Governance
> IFC Corporate Governance Group
> 2121 Pennsylvania Ave., NW 
> Washington, DC 20433 
> Tel: +1 (202) 473-0027 Fax: +1 (202) 522-1604 
> E-mail: dhartzler at ifc.org Web: www.ifc.org/corporategovernance 
> 
> IFC is a member of the World Bank Group
> 
> Reduce your environmental footprint. Print only if necessary.
> 
> 
> 
> From:
> Justin <jp0181 at yahoo.com>
> To:
> Northern Va Corvair Club <novacc-list at corvair.org>
> Date:
> 06/06/2013 07:36 AM
> Subject:
> Re: [NoVa-Corvairs] 1960 Corvair 700 Coupe For Sale
> 
> 
> 
> The next two to three weeks would be great. The weekend of the 21.22nd of 
> June. Let me know.
> 
> J. Smalley
> 
> 
> On Jun 6, 2013, at 6:00 AM, Darrin Hartzler <dhartzler at ifc.org> wrote:
> 
>> 
>> Lift would be great!
>> 
>> I would not need pay to help, just need to find the time.
>> 
>> Darrin
>> 
>> Sent from my iPhone
>> 
>> On Jun 5, 2013, at 9:52 PM, "mike runnels" <mrunnels at verizon.net> wrote:
>> 
>>> Yeah we can it here at my house on the lift..:) I would recommend
> having
>> one of the guys who knows the ins and outs of doing it better than me to
>> come and assist. But I have lift and tools..
>>> 
>>> 
>>> -----Original Message-----
>>> From: novacc-list-bounces at corvair.org
>> [mailto:novacc-list-bounces at corvair.org] On Behalf Of Justin
>>> Sent: Wednesday, June 05, 2013 9:12 PM
>>> To: Northern Va Corvair Club
>>> Subject: Re: [NoVa-Corvairs] 1960 Corvair 700 Coupe For Sale
>>> 
>>> Mike you offering an install were your at? I'm will to pay some members
>> if I have to.
>>> 
>>> J. Smalley
>>> 
>>> 
>>> On Jun 5, 2013, at 8:48 PM, "mike runnels" <mrunnels at verizon.net>
> wrote:
>>> 
>>>> I have a trailer....we can do it here, or take it up there...
>>>> 
>>>> Mike
>>>> 
>>>> -----Original Message-----
>>>> From: novacc-list-bounces at corvair.org
>> [mailto:novacc-list-bounces at corvair.org] On Behalf Of Justin
>>>> Sent: Wednesday, June 05, 2013 8:36 PM
>>>> To: Northern Va Corvair Club
>>>> Subject: Re: [NoVa-Corvairs] 1960 Corvair 700 Coupe For Sale
>>>> 
>>>> I don't have another head as of yet. What else would be required to
>> install ? You have a list such as gaskets, bolts and etc. Jeff has his
>> hands full right now and the tow up there is not worth the hassle. I had
>> $1300 worth of work completed up there and resist to go up there back
> and
>> forth, lol.
>>>> 
>>>> J. Smalley
>>>> 
>>>> 
>>>> On Jun 5, 2013, at 8:03 PM, Greg Walthour <05polarexpress at cox.net>
>> wrote:
>>>> 
>>>>> Do you already have another head?  I'm sure I have an extra good '60
>> head around?
>>>>> 
>>>>> On Jun 5, 2013, at 7:27 PM, Justin wrote:
>>>>> 
>>>>>> Along with this post, do I want to let the car go? No! If I can get
>> the head and the gaskets to replace with help perhaps I may keep it. If
>> not, I'm selling or it will sit until further notice.
>>>>>> 
>>>>>> 
>>>>>> J. Smalley
>>>>>> 
>>>>>> 
>>>>>> On Jun 5, 2013, at 6:37 PM, Justin <jp0181 at yahoo.com> wrote:
>>>>>> 
>>>>>>> To All,
>>>>>>> 
>>>>>>> The left head 4th cylinder spark plug hole is beyond tapping,
>> inserting and etc. the left head needs to be replaced. At this juncture
> I
>> have priced the labor and replacement here locally and its beyond what I
>> want to spend right now. I wanted to have this issue resolved
> permanently
>> in time for the Corsa Convention. I have some other things I'm taking
> care
>> of right now and offering the car up for $2,500 as is. It still runs on
> 5
>> cylinder along with many other upgrades like alternator, tires and CD
>> player. The gas heater works among other things to long to list. If
>> interested, please email or call me at 757-353-2243. It's currently down
>> the street from me at a shop I had looking at the spark plug hole. I
> have
>> the title and would need to be notarized. Please let me know if your
>> interested. Other than the head the car runs like a champ.
>>>>>>> Ill just have to purchase me another one in the future.
>>>>>>> 
>>>>>>> J. Smalley
>>>>>>> 
>>>>>>> 
>>>>>>> On Jun 5, 2013, at 6:06 PM, Justin <jp0181 at yahoo.com> wrote:
>>>>>>> 
>>>>>>>> Perhaps if i don't get any responses back ill just sell the car.
>>>>>>>> 
>>>>>>>> J. Smalley
>>>>>>>> 
>>>>>>>> 
>>>>>>>> On Jun 5, 2013, at 5:24 PM, Justin <jp0181 at yahoo.com> wrote:
>>>>>>>> 
>>>>>>>>> Would anyone in the club be willing help me replace my left
>> cylinder head?
>>>>>>>>> I'm willing to do it myself instead of paying more than my car is
>> worth to do so.
>>>>>>>>> 
>>>>>>>>> 4th spark plug hole integrity is shot.
>>>>>>>>> 
>>>>>>>>> J. Smalley
>>>>>>>> _______________________________________________
>>>>>>>> Novacc-list mailing list
>>>>>>>> Novacc-list at corvair.org
>>>>>>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>>>>>>> _______________________________________________
>>>>>>> Novacc-list mailing list
>>>>>>> Novacc-list at corvair.org
>>>>>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>>>>>> _______________________________________________
>>>>>> Novacc-list mailing list
>>>>>> Novacc-list at corvair.org
>>>>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>>>>> 
>>>>> _______________________________________________
>>>>> Novacc-list mailing list
>>>>> Novacc-list at corvair.org
>>>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>>>> _______________________________________________
>>>> Novacc-list mailing list
>>>> Novacc-list at corvair.org
>>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>>>> 
>>>> _______________________________________________
>>>> Novacc-list mailing list
>>>> Novacc-list at corvair.org
>>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>>> _______________________________________________
>>> Novacc-list mailing list
>>> Novacc-list at corvair.org
>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>>> 
>>> _______________________________________________
>>> Novacc-list mailing list
>>> Novacc-list at corvair.org
>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>> _______________________________________________
>> Novacc-list mailing list
>> Novacc-list at corvair.org
>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list
> 
> 
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list

More information about the Novacc-list mailing list