[NoVa-Corvairs] 1960 Corvair 700 Coupe For Sale

[Justin]

Thanks Bryan!

J. Smalley


On Jun 6, 2013, at 11:48 AM, Bryan Blackwell <bryan at skiblack.com> wrote:

> Take a look at Clark's PN C677VX.  Complete gasket set for one head.  $46.
> 
> --Bryan
> 
> On Jun 6, 2013, at 10:43 AM, Darrin Hartzler wrote:
> 
>> Replacing a head is not so daunting...just lots of parts to remove on the 
>> top of the engine as well as the carb studs if doing it in the car.  Start 
>> spraying penetrant on the top stud nuts on that side now...the ones that 
>> you can see just above the valve cover on that head.     That will help. 
>> You will need exhaust donuts for that side as well as the crossover 
>> (likely), head gaskets (just use stock steel ones), carb base gaskets. May 
>> want to replace the o-rings on the pushrod tubes on that side if you have 
>> not done this yet.  What am I forgetting gents?
> 
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list