[NoVa-Corvairs] Beltline trim

[Justin]

I don't want to mess the trim up lol. Have a guy who specializes in it. Think you could have your guy there in Bolivia make me all the clips I need? I'll pay for them lol. For real. Apparently the trunk, engine and sides use different clip. Clarks can't even give me the oem part numbers so I can cross reference from auveco.
Need that info to perhaps be in the ball park of what I need.



J. Smalley

> On Oct 11, 2013, at 3:44 PM, Richard Widman <rwidman at gmail.com> wrote:
> 
> Don't forget to sand first.
> 
> Then you can get a set of polishing sticks at HF that go from course to fine, using a polishing wheel like this (that I bought back in '71 from Sears).
> 
> 
> <IMG_2134.jpeg>
> _________________________________
> Richard L. Widman | CEO
> (591-3) 344-2233 / (591-7) 705-2487 
> www.widman.biz
> Widman International S.R.L.
> Carretera al Norte km 6
> Santa Cruz de la Sierra - Bolivia
> 
> 
> 
> 
> 
> On Oct 11, 2013, at 3:37 PM, Justin <jp0181 at yahoo.com> wrote:
> 
> Thank you lee. I've tracked down the engine lid . Now I'm in a clips replacement search. I don't have any. Anyone know any good polishers? Of stainless steel?
> 
> J. Smalley
> 
>> On Oct 11, 2013, at 3:25 PM, "A.L. CRAMP" <alcramp at msn.com> wrote:
>> 
>> Justin,
>>  
>> You definitly need to look at Mr.  Widman's website on how he "transformed " his 60 trim.
>>  
>> There is at least one supplier of various vintage repro trim clips and other fasteners.
>>  
>> He used to come to my AACA Region (SMR) swapmeet.   He has a good online catalouge but need to rmember the supplier.  
>>  
>> Surprized that Clarks does not carry repro clips.
>>  
>> Deck lid is unique for the 60 on the inside.   I dd not know you were looking for that.
>>  
>> Frank Duval may have it.  Might still be something at Rich Coburn's (Any one remember any sheet metal?)    I might also know of a salvage yard that had about 20 Corvairs , but not sure of any 60's .  Will check one other source for you.
>>  
>> Lee Cramp -- 240-704-5479
>>  
>> From: jp0181 at yahoo.com
>> Date: Fri, 11 Oct 2013 12:06:38 -0400
>> To: novacc-list at corvair.org
>> Subject: [NoVa-Corvairs] Beltline trim
>> 
>>  
>>  
>> 
>> Everyone knows I been trying to track down the original beltline trim. I just bought the rear quarter panels and doors from clarks. Getting two front panels from rafee and just need the engine lid. Need clips and that it's besides trying get these polished or me polishing them back up. J. Smalley
>> _______________________________________________ Novacc-list mailing list Novacc-list at corvair.org http://www.vv.corvair.org/mailman/listinfo/novacc-list
>> _______________________________________________
>> Novacc-list mailing list
>> Novacc-list at corvair.org
>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list
> 
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.vv.corvair.org/pipermail/novacc-list/attachments/20131011/a4e9b95e/attachment.html