[NoVa-Corvairs] Idler Pulley Bearing

[clshimp at q.com]

Members, if you have thought about getting a replacement idler bearing from Clark's w or w/o the pulley and/or arm now is a good time to do it.  I just got one and the bearing is 75% larger (longer).   The last time I got one from Clark's the bearing was the same size as the original but the shaft that presses into the aluminum arm was short and would only go half way into the arm.  I never used it as I was concern the downward force on the pulley might pull the shaft out of the arm.  The shaft on the pulley I just received is 3/8"longer than the original and protrudes out through the arm.  Little chance of it pulling out.  By the way Clark's is paying $40 for old arms with bearing and pulley.  Curt 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.vv.corvair.org/pipermail/novacc-list/attachments/20140204/178fa439/attachment.html