[NoVa-Corvairs] Video of Corvair Jay's Parts

Wed Dec 6 23:52:10 EST 2017

My friend Paul Whelan is interested in a windshield and transaxles. And 
other parts.

I am interested in convertible seat bottoms. And probably what else 
might be left..... Stop me!

I know someone else also wanted a tinted windshield.

Rory, did you make an offer yet? I was waiting for your reply.

Frank DuVal

On 12/6/2017 4:58 PM, Darrin Hartzler wrote:
>
> Not sure the status of this, but if someone is ready to jump in, I 
> would be interested in the 65 buckets.
>
>
> Thx
>
> Darrin
>
> *From:*Novacc-list [mailto:novacc-list-bounces at corvair.org] *On Behalf 
> Of *Mark Holmlund via Novacc-list
> *Sent:* Monday, November 20, 2017 1:23 AM
> *To:* novacc-list at corvair.org; corvairduval at cox.net
> *Cc:* Mark Holmlund <goopofoil at aol.com>
> *Subject:* Re: [NoVa-Corvairs] Video of Corvair Jay's Parts
>
> Hi Frank,
>
> If you scrolled down on my email, I had made a few notes on Rory's 
> list but forgot to mention it. I caught the year on the starter. Did 
> not turn the bell housing around to look at cam side. I saw the 65 
> convertible seat bottom and I think there were some matching EM Vert 
> seat bottoms.
>
> Mark Holmlund
>
> -----Original Message-----
> From: FrankDuVal via Novacc-list <novacc-list at corvair.org 
> <mailto:novacc-list at corvair.org>>
> To: novacc-list <novacc-list at corvair.org <mailto:novacc-list at corvair.org>>
> Cc: FrankDuVal <corvairduval at cox.net <mailto:corvairduval at cox.net>>
> Sent: Mon, Nov 20, 2017 12:33 am
> Subject: Re: [NoVa-Corvairs] Video of Corvair Jay's Parts
>
> Very good pictures. That is a weighted pressure plate. 62  4 speed  
> transmission? No, no drain plug, therefore 63 to 65.
>
> Frank DuVal
>
> On 11/19/2017 9:22 PM, Mark Holmlund via Novacc-list wrote:
>
>     Here is a link to see what Rory and I "SAW" today.
>
>     https://youtu.be/xMZ-pNQcQHE
>
>     -----Original Message-----
>     From: Rory <roryinmd at gmail.com> <mailto:roryinmd at gmail.com>
>     Sent: Sun, Nov 19, 2017 5:35 pm
>     Subject: Re: December HAM Newsletter
>
>     Mark and I visited Corvair Jay earlier today. The stash was a lot
>     smaller than I expected and it was mainly parts for early's.  The
>     majority of the parts are interior panels and seats for
>     convertibles. There is a lot of trim pieces too.  Most parts are
>     labeled 1964.  There is a convertible frame and complete parts for
>     a power top including hydraulics.
>
>     This is what we saw in no particular order. Bear in mind that I
>     may not have the names correctly stated. These items are a bulk
>     purchase. I think he knows these items are not worth a lot of money.
>
>     64 convertible top bow
>
>     Misc interior panels for '64 - blue, black, red and white.
>
>     Box of visors
>
>     Wheel well trim - early
>
>     3 65 bucket seats - white
>
>     Lots of early convertible trim and hardware
>
>     80 HP PG distributor
>
>     '60 wiring harness
>
>     Back seats for convertible - blue, black and white (the white is
>     for a late model
>
>     Set of carbs - '65 140w/ linkage
>
>     Tinted windshields for '64 with chrome trim
>
>     Complete early convertible frame
>
>     Misc parts for '64 including locking windshield handles and tons
>     of trim pieces
>
>     '63-65 4 speed transmission
>
>     (2) 64 4 speed transmissions with diffs - one has a broken snout
>
>     '61-69starter
>
>     Couple of early flywheels
>
>     Flywheel and pressure plate for a late 140 180
>
>     Bell housing - don't know the yearmanual
>
>     Maybe late model convertible latches (2)
>
>     There is also a few parts that Jay wants to sell that are not part
>     of the bulk package.
>
>     Spyder dash cluster
>
>     4 140 carbs
>
>     4 wire wheel covers
>
>     Give me your thoughts, especially the Early owners. If I had to
>     price the bulk items I would think $200.
>
>     Rory
>
>     On Thu, Nov 16, 2017 at 2:06 PM, Rory <roryinmd at gmail.com
>     <mailto:roryinmd at gmail.com>> wrote:
>
>         All,
>
>         Today i communicated with the guy, Jay, in Laurel, MD who has
>         a lot of Corvair parts. Years ago he and his father worked on
>         Corvairs. Now Jay and his son work on Italian and British cars.
>
>         I met him through the Burtonsville Car meet, which are held on
>         Sunday's. He is interested in getting rid of his stash. I'm
>         trying to arrange to meet him this weekend and it would be
>         great if another club member can join me to see if what he has
>         is worth a bulk purchase.
>
>         We can discuss on Saturday to come up with a plan.
>
>         Rory
>
>         On Nov 15, 2017 10:04 PM, "Robert Marshall"
>         <ram19195 at gmail.com <mailto:ram19195 at gmail.com>> wrote:
>
>             See attached
>
>             Bob
>
>     _______________________________________________
>
>     Novacc-list mailing list
>
>     Novacc-list at corvair.org <mailto:Novacc-list at corvair.org>
>
>     http://www.vv.corvair.org/mailman/listinfo/novacc-list
>
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org <mailto:list at corvair.org>
> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vv.corvair.org/pipermail/novacc-list/attachments/20171206/e7794654/attachment-0001.html>