[NoVa-Corvairs] Here is the photo

[mark.walters1 at verizon.net]

Trey,

  I was away for the last 10 days without email.  It seems we have a NVCC meeting scheduled at your place tomorrow morning.  What’s your address?

Thanks,
Mark Walters
 

Sent from Mail for Windows 10

From: charles nelson via Novacc-list
Sent: Tuesday, January 17, 2017 2:50 PM
To: Northern Va Corvair Club
Cc: charles nelson
Subject: Re: [NoVa-Corvairs] Here is the photo

Thanks Frank

Sent from my iPad

> On Jan 16, 2017, at 10:31 PM, FrankDuVal via Novacc-list <novacc-list at corvair.org> wrote:
> 
> The hole is supposed to line up with the hole in the other block half.
> 
> Maybe someone picked the best two block halves, and "made" them work. But forgot to make this hole line up.
> 
> Do you have a drill that can drill that hole through? Tight clearance in there. You can always use a nut instead of the Helicoil.
> 
> Frank DuVal
> 
>> On 1/16/2017 7:32 AM, charles nelson via Novacc-list wrote:
>> Looking at that threaded hole it appears that the two halves may not line up well. This may not allow for a bolt to go all the way through. When looking at it I'm not sure that it is threaded any longer. Is it necessary to go through or would it just screw into the one side?  If it only goes in one side and it has no thread is this a proper place for a helicoil?
>> Thanks
>> Trey
>> 
>> Sent from my iPad
>> 
>>> On Jan 15, 2017, at 11:51 PM, Curtis Shimp via Novacc-list <novacc-list at corvair.org> wrote:
>>> 
>>> Charles:  Someone has modified the stock oil pick up with a brace located in non stock location on the pick up housing and attaching to the block in a non stock location.  If you have the Otto part you can see that the brace comes back from the pick up housing parallel to the pick up tube and will line up with the threaded hole at the split in the block halves.  I'm not sure what the bolt size is 5/16 x 20?, but you can try a few from your bucket of bolts and see.  So, if you remove the current pick up and put the the Otto unit in all should line up nicely.  Curt
>>> 
>>> 
> 
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list
_______________________________________________
Novacc-list mailing list
Novacc-list at corvair.org
http://www.vv.corvair.org/mailman/listinfo/novacc-list

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vv.corvair.org/pipermail/novacc-list/attachments/20170120/64b05d78/attachment.html>