[NoVa-Corvairs] Corvair Club Meeting this coming Saturday!

[63redbrier at cox.net]

Hi, Bryan!  I don't recall if you were at the last meeting at Ron's; however, we installed factory quick steering arms on my wife's '65 Monza coupe at that meeting.  I have worked with Ron and my son a few times to align the front end on the Corvair, and I am pretty happy with how it tracks down the road and handles!  About 2 years ago I installed a factory "wood" wheel on the car and it was off about 2" since then and installing the new arms has exacerbated the off center steering wheel.  The "spokes" of the wheel are not between 10-11 and 4-5.  You are welcome to make any adjustments you see fit.  Will you be at the meeting?  Thanks!  Greg

---- Bryan Blackwell via Novacc-list <novacc-list at corvair.org> wrote: 
> Hi Greg,
> 
> > On May 15, 2017, at 10:49 AM, Greg Walthour via Novacc-list <novacc-list at corvair.org> wrote:
> > 
> > Third:  Remove and center the steering wheel!  Easy peasy, no?
> 
> I would check the tie rod end sleeves to be sure someone didn't align it off center, there's a high spot in the steering box to give better on center feel.  As I recall there's an alignment mark on the steering shaft, but with the car in the air you can feel the center spot as well.
> 
> --Bryan
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list