RMC List - 1968 Corvair Seats

[Steve Goodman V]

Thanks Mike. Pat Hall is fellow in Albuquerque with lots of parts. I have a
phone number at the shop.

Steve

On Mon, Dec 26, 2022, 8:57 PM MICHAEL PIPER via RMC-List <
rmc-list at corvair.org> wrote:

> Sorry this is reply to all.
>
> U-Pull-&-Pay in Aurora, and there might be a similar place in Colorado
> Springs, or LKQ Pick your Part (2 locations in the metro area) are the two
> places where I've spent time strip[ping Corvairs.  I've seen '65 & '66
> cars, one time an early, but not later, and they rarely have any Corvairs.
> There is a yard north of town, it might be Speedway Auto Parts that people
> have told me have Corvairs.  Duane Hays would be a good source but Duane
> spends the winter in NM.  There is a guy south of Albuquerque that is
> reported to have a lot of parts.  I don't recall his name but you can
> contact Chris Kimberly.  She would know.
>
> As Steve observes, getting beyond driving distance will make shipping cost
> an issue.  California Corvairs might have something but they are in
> California...
>
> Regards,
>
> Mike
>
> On 12/26/2022 5:27 PM rearengine.steve--- via RMC-List <
> rmc-list at corvair.org> wrote:
>
>
>
> Hello again David: I realized that I replied too quickly.  I forgot to
> mention 'pick n pull' in Aurora and I believe there is another such place
> here in the area but I am not familiar with a name.  They get cars which
> are available for the public to remove parts before sending the remains to
> the crusher.
>
> Depending upon your vision of the car 1968 and 69 is very similar and I am
> guessing you will need upholstry kits for anything you find and of course
> the color of your car.  All 69 Monza cpes have head rest bucket seats as
> well as late 68 Monza cpe.  Rear folding seats are same as far as bolt onto
> your floor.  I confess to not being sure about 67 sorry.
>
> Again good luck with your search.
>
> Steve
>
> On Monday, December 26, 2022 at 11:18:51 AM MST, David Greenberg via
> RMC-List <rmc-list at corvair.org> wrote:
>
>
> I’m looking for front bucket seats and rear seat for my project. Any
> recommendations appreciated.
> David 720 621-1479
>
> Sent from my iPhone
> _______________________________________________
> This message was sent by the RMCs mailing list, all copyrights are the
> property of the writer, please attribute properly.
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org
> _______________________________________________
> This message was sent by the RMCs mailing list, all copyrights are the
> property of the writer, please attribute properly.
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org
>
> _______________________________________________
> This message was sent by the RMCs mailing list, all copyrights are the
> property of the writer, please attribute properly.
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vv.corvair.org/pipermail/rmc-list/attachments/20221226/182ec773/attachment.html>