[SCG] Engine Size Emblem Removal on Rear Deck Lid

[Mark Corbin]

By carefully prying it up with a small flat screw driver or other flat
tool. You gently work your way around the emblem and work it up a little at
a time. And use a shop rag under it to protect the paint.

-Mark 


> [Original Message]
> From: <eamsquared at comcast.net>
> To: VirtualVairs <virtualvairs at corvair.org>; Stock Corvair Group
<scg-list at tiger.skiblack.com>
> Date: 4/10/2013 6:21:49 PM
> Subject: [SCG] Engine Size Emblem Removal on Rear Deck Lid
>
> 


How does one remove the engine HP emblem on the rear deck lid?  They are
held in place with barrel clips.  The question then becomes how to remove
the barrel clips. 

  

Erich Meyer 

Bayshore Corvair 

Original Owner '66 Monza
This message was sent by the SCG-list mailing list, all copyrights are the
property
of the writer, please attribute properly. For help,
mailto:scg-list-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: SCG-list at tiger.skiblack.com
Change your options: http://www.vv.corvair.org/mailman/options/scg-list