[V8Vairs] Help on bellhousing Dust Cover Part No.

[v8vairs@corvair.org]

Ed:

Thanks;  I will give it a try!

Gary

In a message dated 2/10/05 4:42:29 AM Pacific Standard Time, 
ed_dowds@hotmail.com writes:

> 
> 
> Gary-
> If you have the numbers off the bellhousing the restorers can usually 
> determine what the bellhousing fits.
> I have run into the same problem with pulleys for my 4.3 vair. I have a 
> vette serpentine waterpump so I can run a v-belt on my reversed engine. That 
> 
> pump is just slightly taller than the standard "short" pump. I've been 
> juggling pulleys trying to come up with a set that will work. It looks like 
> I'll run a standard short waterpump pulley and space out the crank pulley to 
> 
> align the belt.
> Let me know if you can't ID the bellhousing. I may be able to get someone to 
> 
> look it up in a Hollander's interchange book from the numbers.
>                     Ed
> _______________________________________________
> V8Vairs mailing list
> V8Vairs@corvair.org
> http://www.vv.corvair.org/mailman/listinfo/v8vairs
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/