[V8Vairs] Help with Hyd Clutch

[Ed Dowds]

Don-
The Chevy master is 1-1/8th inch bore. I believe it was used '60-'62. They 
used a 1-1/16th inch slave. The were some International Harvester trucks 
which used a similar master which was 1" bore but the parts have to be 
swapped side to side as the brake was on the opposite side from the Chevy 
master. The IH master is much harder to find than the Chevy one. Some of the 
aftermarket masters actually have "Clutch" and "Brake" cast into the housing 
so that the correct master is used.
                                        Ed