[V8Vairs] Help with Hyd Clutch

[Don Stephens]

Thanks for the info. Would I be safe using a 1 1/8" Master with a 15/16" 
slave?

Don



Rick & Janet Norris wrote:

>
> The dual master cylinder that was in my Crown car when I bought it was 
> part number 3768216 located on bottom of casting. It had 1 1/8" 
> diameter pistons. It was for a 1962-1965 Chevy C-65 one ton truck.
> Rebuild kits from NAPA, part number 253 for the brake side and 254 for 
> the clutch side.
> Slave cylinder was part number 313200 aluminum casting with number GE 
> 1401 on oppisite side. Rebuild kit is Lucas Girling part number SP2085 
> (does not include new pistons).
>
> Rick Norris
> First President CORSA 1971
> Email rickjanet at charter.net
> Web Site http://webpages.charter.net/corvairalley
> V8 Vairs Web Site http://www.v8vairs.com
> _______________________________________________
> V8Vairs mailing list
> V8Vairs at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/v8vairs
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
>
>