[V8Vairs] ZF info

[wayback]

Don, Yes this is the measurement for the ZF and the 327 in my 67 
corvair.  The ZF came out of a 71 Pantera and was found in a junk yard 
in Ok. back in the 70s.  Price at that time was 1700.00 but it needed 
to be rebuilt.  That is where it got pricey.

Don Prusha  327 ZF
On Mar 30, 2005, at 1:44 PM, Don Stephens wrote:

> Thanks; that sounds like plenty of room. I'm assuming that this is a 
> ZF....
>
> Don
>
> wayback wrote:
>
>> Don, I have a measurement  of 47 inches from the dash to the 
>> waterpump pulley.  I am 6ft and have another 3 inches that I can move 
>> the seat back to the roll bar partition. The adapter/bell housing 
>> came from KEP and the beefy splined half shafts were made up for me 
>> by Cleveland Clutch.  All has worked fine for many years.
>>
>> D. Prusha 327 ZF
>>
>> _______________________________________________
>> V8Vairs mailing list
>> V8Vairs at corvair.org
>> http://www.vv.corvair.org/mailman/listinfo/v8vairs
>> This list sponsored by the Corvair Society of America, 
>> http://www.corvair.org/
>>
>>
>
> _______________________________________________
> V8Vairs mailing list
> V8Vairs at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/v8vairs
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
>