[V8Vairs] Replacement Gauges

[Ryan Counterman]

On second thought and with a little research the ones I used were 2 1/16". 
Sorry for any confusion.  Mechanical speedo, and with my tire size and all 
its just a general indicator, +/- 10 mph...
Ry
----- Original Message ----- 
From: "Tim Barrie" <tbarrie at meritprecision.com>
To: "'discussion of non-stock engines in Corvairs'" <v8vairs at corvair.org>
Sent: Tuesday, January 23, 2007 2:31 PM
Subject: RE: [V8Vairs] Replacement Gauges


> Thanks for everyone's help.
> Ordered my gauges today with an electronic speedometer. I am in Canada and
> need to program it for Km/h.
> Does anyone have a way to mate the Corvair speedometer cable with a speed
> sensor?
> Tim
>
> -----Original Message-----
> From: v8vairs-bounces at corvair.org [mailto:v8vairs-bounces at corvair.org] On
> Behalf Of Ryan Counterman
> Sent: Tuesday, January 23, 2007 11:44 AM
> To: discussion of non-stock engines in Corvairs
> Subject: RE: [V8Vairs] Replacement Gauges
>
>
> Go here to see what I did with my Corsa dash...
>
> http://webpages.charter.net/vairking/interior.htm
>
> IIRC, it used 3 3/8" for speedo and tach and 2 1/8" for the other 4 (oil
> pressure, voltage, water temp, and fuel level)
> Guages are autometers from summit or jegs.
>
> Ryan Counterman
>
>
>
>
> ----------------------------------------
>> Date: Mon, 22 Jan 2007 18:40:28 -0800
>> From: paulstrohl at yahoo.com
>> Subject: Re: [V8Vairs] Replacement Gauges
>> To: v8vairs at corvair.org
>>
>> rick, i just checked out the pics of your v-8 vair's dash, and it looks
> great, what a nice looking monza dash! paul  paulstrohl at yahoo.com  66 
> crown
> v-8 (in the paint shop, STILL)
>>
>> Rick Norris <ricknorris at suddenlink.net> wrote:
>> Tim,
>> Here's what I used. This is for a Monza dash.
>> Speedo= 3 3/8"
>> Fuel in center= 2 5/8"
>> Tack= 3 3/8"
>> All the rest= 2 1/16"
>>
>> Take a look at my dash here. http://www.corvaircorsa.com/norris20.html#2
>>
>> Rick Norris
>> www.corvairalley.com
>>
>> > For those that have done it already, what diameter of replacement gauge
>> > best
>> > fits the Corsa cluster.
>> >
>> > Would a 3 & 3/8" speedo and tach work with 2 & 1/8" fuel, water, oil, &
>> > volt?
>> >
>> > Tim
>> >
>> >
>> >
>> > _______________________________________________
>> > V8Vairs mailing list
>> > V8Vairs at corvair.org
>> > http://www.vv.corvair.org/mailman/listinfo/v8vairs
>> > This list sponsored by the Corvair Society of America,
>> > http://www.corvair.org/
>> >
>>
>> _______________________________________________
>> V8Vairs mailing list
>> V8Vairs at corvair.org
>> http://www.vv.corvair.org/mailman/listinfo/v8vairs
>> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
>>
>>
>>
>> ---------------------------------
>> Looking for earth-friendly autos?
>>  Browse Top Cars by "Green Rating" at Yahoo! Autos' Green Center.
>> _______________________________________________
>> V8Vairs mailing list
>> V8Vairs at corvair.org
>> http://www.vv.corvair.org/mailman/listinfo/v8vairs
>> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
>
> _________________________________________________________________
> Get the Live.com Holiday Page for recipes, gift-giving ideas, and more.
> www.live.com/?addtemplate=holiday___________________________________________
> ____
> V8Vairs mailing list
> V8Vairs at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/v8vairs
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
>
>
> _______________________________________________
> V8Vairs mailing list
> V8Vairs at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/v8vairs
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
>