[V8Vairs] 215 Buick reverse distibutor and cam gear (FOR SALE)

[The13Bats at aol.com]

So could I use this and build a reverse rotation buick engine  and mate it to 
a corvair powerglide?
Do you know the weight of the buick vs weight of the vair  engine?
thanks
P.
 
In a message dated 11/12/2008 10:56:53 A.M. Eastern Standard Time,  
vairmech at aol.com writes:

I have just acquired 3 sets of the reverse gear sets already  made. 
These are made from an bronze/nickel alloy also made from a GM print  
and not copied after a used gear or even a new gear, made from a PRINT.  
These are also more accurate than factory gears as the tolerance was  
kept to less that the overall factory spec which is 5 degrees and these  
are within 1 degree. Also the cam gear is slotted not broached to keep  
the tolerance and not distort the gear. I have a link below so you can  
see the quality of the gears. I did an attachment but I think it will  
be stripped on both lists.

The cost is $300 a set plus  shipping to your location.

href="http://s186.photobucket.com/albums/x118/vairmech/?action=view&curre
nt=Rev_Gears-2.jpg"  target="_blank"><img  
src="http://i186.photobucket.com/albums/x118/vairmech/Rev_Gears-2.jpg"  
border="0" alt="215 Reverse cam and distibutor  gears">


Ken  Hand
248-613-8586
www.corvairmechanic.com


_______________________________________________
V8Vairs  mailing  list
V8Vairs at corvair.org
http://www.vv.corvair.org/mailman/listinfo/v8vairs
This  list sponsored by the Corvair Society of America,  
http://www.corvair.org/


 
**************Get the Moviefone Toolbar. Showtimes, theaters, movie news & 
more!(http://pr.atwola.com/promoclk/100000075x1212774565x1200812037/aol?redir=htt
p://toolbar.aol.com/moviefone/download.html?ncid=emlcntusdown00000001)