<VV> Re: Distributor Screw

vairologist@juno.com vairologist@juno.com
Thu, 5 Aug 2004 17:11:32 -0400

> From: "Russ Moorhouse" <corvair65@verizon.net>
> Subject: <VV> Distributer Question
> The screw that holds the points to the plate on my car seems to be a 
> bit too short. I know I will have to cut the new one down, but how much
longer can it be than the 
> original without interfering with something?
Smitty says:  Run the new screw in till it bottoms out.  Measure from the
head to the plate.  Then remove it and cut off just a little more than
what you measured.