<VV> Rear wheel wear

Joel McGregor joelsplace@earthling.net
Sat, 7 Aug 2004 19:59:17 -0500

You can check the camber with a level on the rim.  If it is just the inside
edge then it is more likely it is toed out too much.  You can check that
with a tape measure from tread to tread on the front and back of the tires.
It should be close to the same measurement.  I usually set mine as close to
0 toe as possible.

Joel in Keller, TX (DFW area)
'66 Corsa w/air
'63 Greenbrier 4spd
'63 Greenbrier 8dr 4spd "Bob"
'63 900 Convertible 4spd
'67 Monza 4spd Posi
15 others