<VV> ..possible ground issue - revisited

[YENBAT@aol.com]

In a message dated 2/26/04 6:17:28 PM Pacific Standard Time, 
garko@tampabay.rr.com writes:
I have one issue remaining, which I've not been able to fix.  When I pull
the HL switch to either the 1st or 2nd position, my instr lights do not
light; instead, my right directional signal comes on.  The directional also
dims instead of the Instr lights when the dimmer is applied. The left turn
signal works normally, but when the right turn signal is applied, the
directional lamp does nothing.  (All 4 exterior directional lamps work
fine).  So, in other words, only the right interior directional signal and
instr lights are affected.
Your right directional indicator is wired to the Instrument lamp circuit... 
the instrument lamp circuit must not be connected to anything.

You will need a copy of the schematic to check this out... In the shop manual.

Tim Abney

 
Proud Member of 
International Union of Operating Engineers, Local 501
Life Member McHenry County Illinois VietNow
Member American Legion Post #777 - San Bernardino, CA 
Member Society of the First Infantry Division (Big Red One)
KLIK - Lai Khe, RVN - 1967-68
Corsa Member
I.E.C.C. President
1965 Corvair Monza Coupe - Valley Vairs Cover Car January 2003 - 2nd Edition
1964 Corvair Monza 4 Door - Back burner project
1961 Corvair Lakewood Wagon - Starting restoration
1962 Corvair 700 4 Door - Very Solid - For Sale Cheap

[demime 0.98e removed an attachment of type image/jpeg which had a name of iuoe%20logo.jpg]