<VV> Carb inlet issue

Norman C. Witte ncwitte@wittelaw.com
Tue, 8 Jun 2004 13:37:25 -0400


I was not specific enough, my bad.  It was the top part of the carb that
stripped.  And I fixed it!  I called Grant and he is shipping me a new top
today, for a very reasonable price.  So there appears to be a happy ending
to my story.

Norm
  -----Original Message-----
  From: Sethracer@aol.com [mailto:Sethracer@aol.com]
  Sent: Tuesday, June 08, 2004 1:05 PM
  To: ncwitte@wittelaw.com
  Subject: Re: <VV> Carb inlet issue


  In a message dated 6/8/04 6:57:18 AM Pacific Daylight Time,
ncwitte@wittelaw.com writes:
    I got my trusty 1 in.
    wrench to tighten the inlet nut and it was stripped.
  Norm - Is it the large thread in the carb that stripped, or the small
thread on the inlet line nut on the tube? - Seth