<VV> Engine miss with rapid tach movement

BobHelt@aol.com BobHelt@aol.com
Tue, 11 May 2004 00:57:19 EDT

In a message dated 5/10/04 8:59:50 PM US Mountain Standard Time, 
dsjkling@sbcglobal.net writes:

> The coil measures good, low resistance between (-) and (+) (2-3 Ohm)
You may not have a dvm that reads accurately at low resistances, but the 
stock coil should read between 1.28 and 1.42 ohms. That is a nominal 1.35 +/- .07 
ohms. Your resistance is rather high.
Bob Helt