<VV> Man, do I feel stupid! was RE: Engine miss with rapid tach movement

VairMech@aol.com VairMech@aol.com
Wed, 12 May 2004 08:03:44 EDT


In a message dated 5/12/2004 1:00:06 AM Eastern Standard Time, 
dsjkling@sbcglobal.net writes:
Talk about an oblong hole!
much more and it would have worn completely thru the vacuum advance shaft.
This amount of wear would allow the point plate to move back and forth as
the rotor spins. 
>>>>>>>>>>>>
    If this is the Spyder engine that is not a vacuum advance but rather a 
pressure retard. See my previous post and still check things out.
    Ken Hand