<VV> Re: TIME SERTS(slightly corvair)

Patten Del R Civ AFRL Det 8/PKMA del.patten@kirtland.af.mil
Mon, 17 May 2004 16:07:47 +0100

  We got ours at the local bolt shop...unfortunately they only carry the SS
ones so they were a bit pricey...surprisingly the smaller sizes are more
expensive than the larger ones!!  

  Del Patten...CNM

-----Original Message-----
From: virtualvairs-admin@corvair.org
[mailto:virtualvairs-admin@corvair.org]On Behalf Of N2VZD@aol.com
Sent: Sunday, May 16, 2004 2:50 AM
To: virtualvairs@corvair.org
Subject: <VV> Re: TIME SERTS(slightly corvair)

if you check at a good local garage or lawnmower shop i bet they have the 
tool and inserts in stock. i used to do them all the time on small
any engine/heads i did i replaced any questionable looking and all number 5 
plug holes on turbo heads. they work well and do not move if put in place 
properly. watch the length!                   regards tim colson
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
This list sponsored by the Corvair Society of America,
Post messages to: VirtualVairs@corvair.org
List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs